‭02 8970 8767‬ sales@hancan.com.au

INSTEON Plug-in Relay (On/Off)

$69.00 inc. GST

Add INSTEON control to a plug-in appliance with the Plug-In Relay (On/Off) responder. Can be controlled by any INSTEON controller.

In stock

SKU: HANCAN-NDL-IN2633-522 Category: Tag:

Description

A full-featured plug-in on/off switch that can be remotely controlled by any other INSTEON controller. This on/off module controls all standard appliances like lamps, appliances, fans and many other plug-in, non-dimmable devices.

  • Easy DIY “plug and play” operation
  • Add INSTEON control to your plug-in on/off devices
  • Full local control (on/off)
  • Super-quiet On/Off relay operation
  • Award-winning INSTEON technology provides superior reliability

Easy “plug & play” installation

The sleek, discrete INSTEON Plug-In (On/Off) module makes adding customisable remote control to your lamps and appliances as easy as plug and play. It’s home automation at its simplest and most convenient.

How it works

Plug the module into any standard power outlet and then plug the device that you want to control into the module. Pair or add the module to your INSTEON Controller and then you’re done…it’s that easy!

What it can do

Adds INSTEON on/off control to any plug-in appliance or lamp. Here are just a few ideas…

  • Non-dimmable lamps
  • Audio/visual equipment
  • Plug-in air conditioners
  • Fountains & pool pumps
  • Heated towel rails
  • Electric blankets
  • Plug-in fans
  • Plug-in heaters
  • Coffee makers
  • Appliances

Specifications

General

Product Name: INSTEON Plug-In Relay (On/Off)
Product Code: 2633-522
Regions: Australia and New Zealand
In the box: INSTEON Plug-In Relay (On/Off)
Warranty: 2 Years

INSTEON

INSTEON Powerline Mesh Repeater: Yes
INSTEON RF Mesh Repeater: Yes
INSTEON Controller: Yes
INSTEON Responder: Yes
Maximum links/scenes: 400
Status LED: Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)
LED brightness: Adjustable from off to 100% bright
Beep on button press: Beeps red to indicate traffic (must be enabled via software)
Local control: Yes
Commands supported as controller: On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim
Commands supported as responder: On / Off, Fast On / Fast Off, Beep
Software configurable: Yes
RF range: Up to 50 meters feet open air
Phase detect beacon: Yes
X10 support: Yes
X10 addresses: Any 1 of 256 (unassigned by default)
INSTEON device category: 0x02 appliance module
INSTEON device subcategory: AUS / NZ (921.0 Mhz), 0x36

Mechanical

Mounting: Standard AC power outlet
Casing: UV stabalized plastic (INSTEON White)
Set button: Yes
Beeper: Yes
Beep on button press: Optional (off by default)
LED: 1 RGB
Dimensions: 43mm W x 108mm H x 35mm D
Weight: 130g ? 10g
Operating Conditions: Indoors, 0? C to 40? C, up to 90% relative humidity