‭02 8970 8767‬ sales@hancan.com.au

INSTEON Micro Motor Controller

$89.00 inc. GST

Add hidden control of your home’s motorised projection screens, curtains, blinds or roller shutters with this INSTEON Micro Motor Controller. Easily installed by a licensed electrician, its compact design means it will fit in the wall behind most electrical switches. Its clever design also means you still maintain local switch control as well as INSTEON control of the connected motorised device.

In stock

SKU: HANCAN-NDL-IN2444-522 Category: Tag:

Description

Add hidden control of your home’s motorised shutters, blinds, projector screens and more with this INSTEON Micro Motor Controller module. Easily installed by a licensed electrician, its compact design means it will fit in the wall behind most electrical switches. Its clever design also means you still maintain local switch control of the connected motorised device.

  • Add INSTEON remote control to motor-controlled shutters, blinds and more
  • Installs behind existing switch
  • Clever sense wiring retains local control at the switch
  • Award-winning INSTEON technology provides superior reliability

Overview

Want to add wireless remote control to your automated window shutters, blinds and projector screens? INSTEON makes it easy. The INSTEON Micro Motor Controller is the first INSTEON device designed specifically for up/down and open/close motor-controlled appliances. By including the Micro Motor Controller module as a part of your INSTEON home automation network, you will enjoy remote control of your shutters, blinds, screens and more.

How it works

This compact module installs behind your existing switch, giving it full INSTEON automation while retaining local control at the switch by way of sense wires. The patented INSTEON dual-band communication reliably sends signals over existing electrical wires (powerline) in your home and via radio frequency (RF). The Micro Motor Controller is so tiny that it can even be installed as an in-line module within a fixture box, and you can then control it from any INSTEON controller, providing remote control without running wires to a wall switch.

Specifications

General

Product Name: INSTEON Micro Motor Controller
Product Code: 2444-522
Regions: Australia and New Zealand
Warranty: 2 Years

INSTEON

INSTEON Powerline Mesh Repeater: Yes
INSTEON RF Mesh Repeater: Yes
INSTEON Controller: Yes
INSTEON Responder: Yes
Maximum links/scenes: 400
Load brightness levels: 32 locally (256 with software)
Status LED: Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software)
LED brightness: Adjustable from off to 100% bright
Beep on button press: Beeps red to indicate traffic (must be enabled via software)
Local control: Yes
Commands supported as controller: On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim
Commands supported as responder: Open (On) / Close (Off), Begin raise (brighten) / / Begin lower (dim), End raise (brighten) / End lower (dim), Beep
Software configurable: Yes
RF range: Up to 50 meters open air
Phase detect beacon: Yes
X10 support: Yes
X10 addresses: Any 1 of 256 (unassigned by default)
INSTEON device category: 0x0E Window Coverings
INSTEON device subcategory: AUS / NZ (921.0 Mhz), 0x32

Mechanical

Mounting: Behind switch or outlet, or above light fixture in single-gang electrical box
Casing: UV stabalized plastic (INSTEON White)
Wire connections: Sense 1 (yellow): 24 AWG, 0.205mm, Sense 2 (purple): 24 AWG, 0.205mm
Max. wire size: 4mm, 12 AWG (2.72mm diameter)
Min. cable size: 1.5mm, 15 AWG
Screw clamp connections: Line, Load 1 (up), Load 2 (down), Neutral
Set button: Yes
Beeper: Yes
Beep on button press: Optional (off by default)
LED: 1 RGB
Dimensions: 46.6mm W x 17.5mm H x 46.6mm D
Weight: 72g
Operating Conditions: Indoors, 0C to 40C, up to 90% relative humidity

Electrical

Voltage: 100VAC to 240VAC (10%)
Frequency: 50/60Hz auto-detected at power-up
Max. load: 8A resistive, 3A motor
Load types: Resistive, Inductive/capacitive, Low voltage halogen, motor
Hardwired remote control: Yes, either latching or momentary switches supported
User replaceable fuse: N/A
Retain all settings without power: Yes, saved in non-volatile EEPROM
Standby power consumption: <1W
Safety approved: Approved for use in Australia and New Zealand
Certifications: AS/NZS 4268, CISPR 22, IEC 60669-2-1