‭02 8970 8767‬ sales@hancan.com.au

GOAP (Qubino) Z-Wave Double Switch InWall

$109.00 inc. GST

The GOAP Single Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc …). The module can be controlled either through Z-wave network or through the wall switch manually.

In stock (can be backordered)

SKU: HANCAN-DHS-LIT-SWW-QUB-02 Categories: , Tags: ,

Description

The GOAP Double Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc …). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

Supported switches

Module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Product Details

  • Compatible with any Z-Wave Controller.
  • Dimensions (W x H x D) 41,8 x 36,8 x 15,4mm
  • Power monitoring accuracy P=5-50W, /-3W; P50W, /-3%;
  • Digital temperature sensor range (sensor must be ordered separately) -50 ~ 125?C
  • Support for the connection of digital temperature sensor (optional part)
  • 2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc.

Product Support

Strengthens Z-Wave Connectivity

The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

The GOAP double switch is?Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our “What is Z-Wave Plus” guide for more information.

Note!?Do not connect the module to loads exceeding recommended values. Connect the module only in accordance to the manual and diagrams below. Use only quilified electrician!

This product integrates with Australian certified (921.42MHz) Z-Wave controllers:

Manuals:

GOAP Z-Wave Double Switch Installation Manual

Videos / YouTube:

The smallest Z-Wave module


Technical Specifications

Product Name
Flush 1 relay
Powered by
24V DC or 240V AC
Operation Range
30m
Max Load
2300W (230VAC)
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Power Consumption
0.4W
Operation temperature
-10 – 40 C*
Measured temperature range 0.5?C (within 0?C – 40?C range) (optional sensor)
Temperature measuring accuracy
0.5 C
Housing
ABS
Dimensions (W x H x D)
41.8 x 36.8 x 15.4mm

Additional information

Manufacturer

GOAP

Part#

DHS-LIT-SWW-QUB-02