Description
The Fibaro Z-Wave Double Switch Controller (FGS-222) is a wireless controller which can control two circuits each with a maximum load of 1.5kW per circuit.
- Control the ON-OFF function of two two independent lights or appliances remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
Product Details
The Fibaro Z-Wave Double Switch Controller (FGS-222) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This?Fibaro Z-Wave Double Switch Controller?requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.
The Fibaro Z-Wave Double Switch Controller also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with Australian certified (921.42MHz) Z-Wave controllers:
Please check the maximum load before installing or operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim you have to provide installation compliance certificate from your electrician.
Product Support
Manuals:
Fibaro Z-Wave Double Switch Manual (Size: 1.57 MB)
Videos / YouTube:
Fibaro Home Center 2 Presentation
Technical Specifications
|
RF Protocol
|
Z-Wave
|
|
RF Frequency
|
921.42MHz AU/NZ Approved RF for Z-Wave
|
|
Z-Wave device type
|
Z-Wave Switch, Routing Slave
|
| Power |
110-230V 10% 50/60 Hz
|
|
Operation Range
|
Up to 15m indoors with no obstacles
|
|
Application
|
Indoor use only, up to 1.5kW resistive load per circuit |
|
Operation temperature
|
0 ~ 55?C
|
|
Storage temperature
|
10 ~ 80?C
|
|
Weight
|
50g
|
|
Housing
|
ABS
|
|
Compliance
|
EN 55015, EN 60669-2-1
|
|
Regulatory Compliance Mark |
N5496
|
|
Dimensions |
(LxWxH) 42mm x 37mm x 17mm
|
Installation Instructions and more on Fibaro Manuals Support Page.
