If you are new to home automation, any of the HANCAN exclusive Fibaro Home Center Lite Starter Kit is the perfect foundation for your Z-Wave enabled smart home automation.
Fibaro Home Center Lite Starter Kit – Lite Impress Double Kit requires a qualifies electrician for the installation of the Clipsal wall light switches as well as the Z-Wave switch and dimmer modules.
HANCAN Professional Service is available at your service as an option if you would like us to carry out the installation. We service Sydney Metropolitan Area. If you are located outside Sydney, we can assist you with finding a qualified electrician and/or qualified smart home engineer/technician. Please contact us on firstname.lastname@example.org
Fibaro Home Center Lite – Smart Home Controller AU/NZ
Up to 230 devices in your home
Perfect for new or established homes. Thanks to wireless communication over the Z-Wave protocol, you won’t require any modifications to your home’s structure or any dedicated wiring. You can install it in any building, even if it is completely decorated already.
Save Anergy and Save Money
Thanks to the built-in power management functionality, using the Fibaro Home Center Lite and Z-Wave devices with power metering capabilities, you can monitor the current energy consumption and the power consumption history while being able to spot the devices consuming the most of it.
Detailed statistics are presented as clear charts, helping you compare numbers and estimate bills. Not only will you conserve energy, you will also save a considerable amount of money.
Be alerted to potential threats
At the first sign of trouble, The Fibaro Home Center Lite will immediately inform you of a threatening fire, flood, break-in or leaking gas (provided you have the appropriate Z-Wave devices installed of course). Fibaro Home Center can protect your home by cutting the water supply when pipes are leaking, or cutting the gas supply, ventilate your home and immediately inform you about it. Having discovered a break-in attempt, Fibaro will trigger the alarm, notify security and feed a live video stream from security cameras directly to your mobile devices.
Just the way you like it
There’s nothing like getting back to your warm, cosy home, especially on a cold winter day. Using Fibaro you can start heating and set your favourite temperature while you are still sitting at the office. You will easily program the climate panel, through which your home will be heated to the right temperature on each day of the week, in defined hours.
Set the heating to the perfect temperature that will help you get out of bed easily. For nights, choose the temperature in which you sleep well and wake up relaxed. The Fibaro Climate Panel will make sure your home is always comfortable. You will also save money on heating and cooling costs.
Where are you
Your home always knows where you and your family members are thanks to geo-localisation. When you leave home, the system turns off unneeded devices, arms the alarm system and simulates your presence to discourage thieves from breaking in.
While calculating your return route, the system will adjust temperature and run pre-programmed scenes. Energy saving, safety and comfort.
Fibaro have managed to squeeze the huge capabilities of the intelligent system into one, tiny box (90 x 90 x 33mm). Home Center Lite is a compact device that will spoil you with the comfort of managing your intelligent home through its easy operation and wireless communication. Miniaturisation and advanced technology will make impossible become possible.
The Z-Wave Double Kit contains necessary setup to automate two light circuits control function, which includes 1 x DHS Z-Wave In-Wall Dual Switch and 1 x Clipsal Impress series 2 Gang wall plate with 2 x Impress push button. Push button is used to turn a single light circuit ON/OFF. This set allows manual and remote control of one lighting circuit. It allows you to control your lights manually with push buttons or remotely from your Z-Wave remote, iPhone/iPod/iPad or Android device (requires a Z-Wave home controller).
The Z-Wave Single Kit also contains necessary setup to automate two light circuits dimming control function, which includes 2 x DHS Z-Wave In-Wall Single Dimmer and 1 x Clipsal Impress Series 4 Gang wall plate with 4 x Impress push buttons. For each of the pair of buttons, one button is used to dim the light while the other button is used to brighten the light.
The Z-Wave Single Kit allows manual and remote control of four (4) light circuits, two for on/off and other two for dimming function. It allows you to control your lights manually with push buttons or remotely from your Z-Wave remote, iPhone/iPod/iPad or Android device (requires a Z-Wave home controller).
The Clipsal Impress series wall plate is available in multiple colours including:
- Brushed Aluminium
- Brushed Brass
Note: Please, specify in your order comments the colour of the Clipsal plate you require.
- This product must be installed by a qualified electrician.
- Before engaging an electrician, check that they provide an electrical compliance certificate.
- For warranty claim you have to provide an installation compliance certificate from your electrician.
- Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer’s warranty.
- The neutral wire is not required for the dimmer to function. Using it will void the dimmer’s warranty.
FIBARO Z-Wave Multi-Sensor
The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quckly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.
- Compatible with any Z-Wave Controller.
- Compatible with any Z-Wave or Z-Wave Controller (firmware 3.2 or higher).
- Supports protected mode (Z-Wave network security mode) with AES-128 encryption (firmware 3.2 or higher).
- Battery powered.
- Detects motion using a passive IR sensor.
- Measures the temperature.
- Measures the light intensity.
- Easy installation on a wall or any surface.
- Theft and tampering protection once vibrations are detected, thenotification is sent to the main controller.
- Detected movement, temperature and vibrations are signalled by the built-in LED diode.
- Detects vibrations.
- Built-in accelerometer allows to measure orientation in space.
Fibaro Home Center Lite Starter Kits Comparison
|Fibaro Home Center Lite + Clipsal Starter Kit||Lite Impress Single Kit||Lite Impress Double Kit||Lite Saturn Single Kit||Lite Saturn Double Kit||Deluxe Saturn Single Kit||Premium Saturn Double Kit|
|Fibaro Home Center Lite AU/NZ||1||1||1||1||1||1|
|CLIPSAL Impress Single Light Switch||1||–||–||–||–||–|
|CLIPSAL Impress Double Light Switch||–||1||–||–||–||–|
|CLIPSAL Saturn Single Light Switch||–||–||1||–||1||–|
|CLIPSAL Saturn Double Light Switch||–||–||–||1||–||1|
|CLIPSAL Impress Single Light Dimmer||1||–||–||–||–||–|
|CLIPSAL Impress Double Light Dimmer||–||1||–||–||–||–|
|CLIPSAL Saturn Single Light Dimmer||–||–||1||–||1||–|
|CLIPSAL Saturn Double Light Dimmer||–||–||–||1||–||1|
|FIBARO Z-Wave Multi-Sensor||1||1||1||1||1||1|
|FIBARO Door/Window Sensor||–||–||–||–||1||1|
|FIBARO Z-Wave Garage Door Controller||–||–||–||–||1||1|
|VistaCam 700 Indoor IP Cam||–||–||–||–||1||1|
|VistaCam 1000 Outdoor IP Cam||–||–||–||–||1||1|
|FIBARO Z-Wave Smoke Sensor||–||–||–||–||1||1|
|KAS Z-Wave Keypad Lock||–||–||–||–||–||1|
|VBell VideoVoIP Intercom||–||–||–||–||–||1|
|Warranty||1 Year||1 Year||1 Year||1 Year||1 Year||1 Year|
|Starter Kit Price||$1,021||$1,191||$1,090||$1,287||$1,874||$2,755|