‭02 8970 8767‬ sales@hancan.com.au

DHS Z-Wave Single Switch InWall

$71.00 inc. GST

The Z-Wave In-Wall Single Switch Controller is a wireless controller which can be a part of many whole-home automation solutions.

Available on backorder

SKU: HANCAN-DHS-LIT-SWW-DHS-01 Category: Tags: ,

Description

The Z-Wave In-Wall Single Switch Controller is a wireless controller which can be a part of many whole-home automation solutions.

  • Control the ON-OFF function of a circuit remotely or using a momentary / bell type switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling

Product Details

The Z-Wave In-Wall Single Switch Controller is an advanced Z-Wave controller perfect for remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The Z-Wave In-Wall Single Switch Controller is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.

Example of wiring with Clipsal Saturn range 1 gang wall plate and a 30/60PBBPL Bell Press button. Clipsal Saturn range 1 gang wall plate and 30/60PBBPL Bell Press buttons are sold seperately.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3/Lite (in User Interface 7, please ensure that you have the latest Vera firmware 1.7.572 and above)
  • Raspberry PI with RaZberry Card
  • Fibaro Home Controller 2/Lite
  • DHS Z-Wave Universal Remote Controller
  • DHS Z-Wave Mini Remote Controller

Please check the maximum load before installing or operating.

This installation must be done by a certified electrician in Australia and New Zealand.

Before engaging an electrician, check that they provide an electrical compliance certificate.

For warranty claim you have to provide installation compliance certificate from your electrician.

Product Support

Compatibility Note: There is a known compatibility issue for this device in Vera 3 / Lite home controllers using User Interface 7 (firmware below 1.7.572).

Vera team has fixed this issue in Vera UI7 firmware release 1.7.572. Please ensure that you are using the latest Vera UI7 firmware, 1.7.572 or later.

Manuals:

Z-Wave In-Wall Single Switch Manual (Size: 124 KB)

Videos / YouTube:

Z-Wave In-Wall Single Switch Installation Video


Technical Specifications

RF Protocol
Z-Wave (SingleChannel Command Class)
RF Frequency
921.42Mhz AU/NZ Approved RF for Z-Wave
Z-Wave device type
Z-Wave Binary Switch, Routing Slave

Manual Switch Compatibility

 

BELL PRESS type only
Power
AC 240V / 50Hz
Operation Range
Up to 30m indoors with no obstacles
Application
Indoor use only
Operation temperature
0 ~ 50 ?C
Max Loading

 

6A
Storage temperature
_10 ~ 80 ?C
Weight
50g
Housing
ABS
Compliance
AS/NZS 4268:2008, AS/NZS CISPR 14.1, IEC60669-2-1

Regulatory Compliance Mark

 

N5496

Dimensions

 

(LxWxH) 48mm x 45mm x 18mm

Additional information

Manufacturer

DHS

Part#

DHS-LIT-SWW-DHS-01