‭02 8970 8767‬ sales@hancan.com.au
Sale!

DHS Z-Wave Dimmer InWall

$79.00 $75.00 inc. GST

Available on backorder

SKU: HANCAN-DHS-LIT-DMW-DHS Category: Tags: ,

Description

The Z-Wave In-Wall Dimmer Controller is a wireless controller which can be a part of many whole-home automation solutions.

  • Control the ON/OFF function of your lighting appliances remotely or using a switch
  • Control the degree of illumination of your lighting appliances remotely or using a switch
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling

Product Details

The Z-Wave In-Wall Dimmer Controller is an advanced Z-Wave controller perfect for remotely operating your existing light fittings. It allows you to turn your lights ON or OFF and to adjust their level of illumination with a dimming interval of up to 1%. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The Z-Wave In-Wall Dimmer Controller is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

The controller is also compatible with many popular BELL PRESS type light fittings including Clipsal IMPRESS and SATURN wall switches.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

  • Vera 3/Lite
  • Fibaro Home Center 2/Lite
  • DHS Z-Wave Universal Remote Controller
  • DHS Z-Wave Mini Remote Controller

Compatibility:

Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers(Trailing Edge and Leading Edge)

CFL globes: Dimmable Philips Tornado CFL lamps and similar products.

LEDs: High performance, energy efficient Starburst LED downlight from Pierlite Australia and similar products.

This dimmer works very well with 12W Dimmable LED offered by DHS.

Generic LEDs will NOT work with this product. If you are unsure please talk to your electrician first.

Please Note:

This product must be installed by a qualified electrician.

Before engaging an electrician, check that they provide an electrical compliance certificate.

For warranty claim you have to provide an installation compliance certificate from your electrician.

Do not mix the load type as this will result in improper function of the dimmer. This will void the dimmer’s warranty.

The neutral wire is not required for the dimmer to function. Using it will void the dimmer’s warranty.

Product Support

Manuals:

Z-Wave In-Wall Dimmer Manual (Size: 147KB)

Videos / YouTube:

Z-Wave In-Wall Dimmer


Technical Specifications

RF Protocol
Z-Wave(Multi-Level Command Class)
RF Frequency
921.42Mhz AU/NZ Approved RF for Z-Wave
Z-Wave device type
Z-Wave multiple level dimmer, routing slave
Power
AC 230/ 50Hz
Operation Range
Up to 30m indoor when no obstacles

Dimming Interval

 

1% with safety minimum set up at 25%

Dimmer Type

 

Universal, compatible with electronic transformers (Trailing Edge and Leading Edge). ?Not compatible with iron core transformers.
Application
Indoor use only
Operation temperature
0 ~ 55 ?C
Max/Min Load

 

300W / 75W
Storage temperature
_10 ~ 80 ?C
Weight
70g
Housing
ABS
Compliance
AS/NZS 4268:2008, AS/NZS CISPR 15, IEC60669-2-1

Regulatory Compliance Mark

 

N5496

Load Compatibility

 

Incandescent globes, High Voltage Halogens, Low Voltage Halogens with electronic transformers Trailing Edge or Leading Edge type only. 12W Dimmable LEDoffered by DHS.

Dimensions

 

(LxWxH) 45mm x 48mm x 18 mm

Additional information

Manufacturer

DHS

Part#

DHS-LIT-DMW-DHS