Nano Switch offers total control, easily. Impossibly small, each Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.
Make all your lights smart lights.
- Easily add intelligent Z-Wave wireless control to an existing light switch.
- Built-in power meter monitors energy consumption.
- Includes in-built surge and overload protection.
- Super small (43.5 x 39 x 19.5 mm); easily fits behind your existing wall switch.
- Compatible with 2-state (latching), momentary push button or 2 / 3 – way switches.
- Gen. 5 Z-Wave Plus certified for increased performance and reliability.
Once installed behind a switch or socket, Nano Switch offers unparalleled wireless control via Z-Wave Plus. It lets you control, automate, and monitor your lights light and power sockets. From anywhere. Anytime. And it does it all through enhancement – with Nano Switch, your sockets and switches don’t have to be replaced and they’ll continue to offer the same manual control that you’re used to.
Automation and scheduling.
Easy to install.
All of this control and intelligence simply comes from having an electrician wire the Nano Switch behind your existing light switch…. in minutes.
Works with virtually any switch.
43.5mm x 39mm x 19.5 mm
Designed to control sockets, switches and non-dimming lights powerfully. Nano Switch can control up to 15 amps of power while Dual Nano Switch can control up to 10 amps. See listing for full specs.
Designed to fit behind a wall switch without compromising on safety, Nano Switch measures a slender 4.2cm x 4cm x 2.5cm (1.65” x 1.6” x 0.98”) while Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.
See Your Spend
It powers automation and scheduling, and it also monitors energy monitor. Nano Switch comes in an edition infused with Aeotec’s super-accurate energy metering technology which records electricity use with 99% accuracy.
Nano Switch is a part of Aeotec’s Gen5 range and is engineered upon the latest version of Z-Wave – Z-Wave Plus. From lower power consumption to a 250% faster response time, Nano Switch is laden with benefits you’ll never see, only feel.
Without using any more energy, Nano Switch offers greater wireless reliability than all before it. Its wireless signal is now +2.5dBM more powerful so that Nano Switch can offer a 67% greater wireless range that’s up 150 metres / 492 feet wide.
Technology changes and Nano Switch changes with it. Unlike previous models, Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus so that it remains at the cutting edge.
Because of the high amps it carries and to avoid issues such as stray voltage Nano Switch only works with switches and outlets that utilise a neutral wire. Nano Dimmer is an alternative that works with or without a neutral wire.
It’s quicker to install and it’s also easier to wire. Now 60% smaller than previous in-wall switches, Nano Switch fits into even tighter spaces. It also connects to wires 25% thicker than past models.
Because of the power of Gen5, Nano Switch offers banking-grade, AES-128 bit encryption to protect the wireless communication that your connected home depends on and is run on.
The power of Z-Wave means that Nano Switch can be intelligently automated. But it can also be scheduled to switch on and off on a timer independently, even when Z-Wave your gateway has connection issues.
DIN Rail Compatible
Want to use it with a DIN rail? Pair Nano Switch with a generic DIN housing or module box for DIN rail compatibility and you’ll be able to use it with DIN rail systems.
Low Voltage Too
Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.
Name: Nano Switch
Model number: ZW116 (with energy reading) / ZW139 (no energy reading)
Power input: 120 to 240VAC, 50/60Hz.
AES 128 Security: Yes
|AU||230V 50Hz, Max: 10A||921.42MHz|
Max standby power: <0.8W.
Power measurement accuracy: + or – 3W.
Dimensions: 42.5 x 40 x 20 mm (1.7 x 1.6 x 0.8 in)
30J ± 10%
Accepted Input for L:
90 – 240VAC @ 50/60Hz
External Switch Voltage Requirements:
S1 and S2 inputs the voltage inputted between L and N terminals.
L and N inputted with 90 – 240VAC, then the external switch must also be powered by 90 – 240VAC to S1 or S2 connection.
L and N inputted with 24VDC, then the external switch must also be powered by 24VDC to S1 or S2 connection.
Environment of Installation:
Must be installed indoors
Should be located in a dry location
Should be installed in a fire resistant plastic gangbox.
Should not be installed in a metal gangbox for optimization of Z-Wave range.
0℃ to 40℃
32 ℉ to 104 ℉ .
Relative humidity: 8% to 80%.
Up to 492 feet outdoors.
Up to 150 metres outdoors.